Professional and creative team ! Looking forward to cooperate with you ~
Battery Charger | |
lifepo4 charger | IC GOGOGO store in our aliexpress store !~ |
lipo charger | prompt: Customers who need to change the Anderson plug must keep the original output cable length, solder the wire from the clip, and then install Anderson! Never arbitrarily modify the output wire to thicken, lengthen, or shorten it, causing current errors to be large or even damaged. Milky white 3-15V 100A Use the power supply model: (for Dell) for DEL server power supply installation control modification. (Imported brand) Input voltage: AC 200 --250v (Taiwan customers cannot use) Input power: 1400W-1500W Output voltage: DC constant voltage meets 3V-15V (suitable for charging all batteries in the voltage range) Output current: DC constant current is adjustable from 3-100A. (Only constant current and constant voltage can be used as a charger) Protection mode: constant current output after short circuit of positive and negative poles. (Do not short-circuit the positive and negative electrodes for a long time) Appearance size: length 24CM * width 8.5CM * height 6.6CM. Weight: 1.3KG. Standby power: about 11W. Cooling method: Air-cooled (built-in cooling fan, speed increases with temperature) Included accessories: with two positive and negative wires and copper nose, (the power input cord must be prepared by yourself). The output wire uses two 80A high-quality silicone wires. Precautions:The positive and negative poles of the battery can not be reversed connect (red positive + , black negative - ) Instructions: Step 1: Do not connect the battery to the charger first, need to connect the power, adjust the voltage knob to adjust the voltage, refer to the voltage display at the top of the display, (4s lifepo4 batteries 3.65v * 4 = 14.6 volts, 3s of lipo batteries 4.2v * 3 = 12.6V), adjust to the voltage you need. Step 2: Adjust the current to the minimum. After connecting the battery, adjust the current from small to large and adjust to the current you need. (During the charging process, it is not allowed to adjust the voltage knob, otherwise overcharging or undercharging will occur) If the voltage is displayed, you set the voltage, the current becomes zero, and it is already full. Lead-acid batteries do not support high-current charging. They must be charged with 1/10 of the capacity. For example: 100AH uses 10A for charging, 150AH uses 15A; and so on. The current cannot be adjusted too large, otherwise the battery will be damaged. The time must be 8-10 hours. If the time is too fast, the current will be too large, which will damage the battery. The charging voltage of lead-acid batteries is about 14 volts. The battery manufacturers are different, and the voltage is slightly different. Please refer to the instructions on the battery label! Individually reflect the case of the charged live hand: the power cord is input by three wires, one of which is the ground wire. The above situation is that your power ground wire is not connected or disconnected, just connect the ground wire! The ungrounded wire is not reversed, that is why the shoes are insulated on the ground. (The household appliances such as refrigerators, washing machines, water heaters, etc. will have this phenomenon. Basic common sense issues are not explained. You can learn more about it on Baidu!) About the temperature of the output wire : The output wire uses 80A high-quality silicone wire, and the temperature is 200 Unconventional wire with excellent flexibility and softness. When the maximum current is 100A, the wire temperature is about 50-60 degrees, and the current temperature is within a reasonable parameter range. Customers should not make any remarks with unfounded feel! Note: The product is handmade, and the appearance may be slightly scratched. |