1000 buyers choose us suppliers HXJQ Rod Mill For grinding zine/gold stone /magnetite ore or various metal benefication plant

•  Rod mill introduction

Rod Mill is a grinding machine similar to a ball mill. The obvious difference between the two is the grinding medium. Rod mill is named for the medium of the steel rod. The latter's grinding medium is undoubtedly a steel ball. Both of them can be used for grinding various metal ore and non-metal ore. In some cases, rod mill is also called rod type sand making machine, which is mostly used for making sand.

• Application Of Rod Mill

1. For re-election or magnetic separation equipment of tungsten-tin ore and other rare metal ores, to prevent damage caused by excessive grinding, a rod mill is often used.

2. When using a two-stage grinding process, if the first part is milled from 20-6mm to 3-1mm, the rod mill is used as the first part of the grinding equipment. More productive capacity and higher efficiency.

3. In some cases, it can be used to replace the short cone crusher for fine crushing. The configuration is simpler and the cost is low, which can simplify the dust removal in the crushing workshop.

•  MBS Type Rod Mill Features:

1.Energy Saving: During the grinding process, the grinding medium is in line contact with the ore, so it has a certain selective grinding effect. More than 41% energy is saved over previous older devices, and reduce costs.

2.High Efficiency: The rod mill has a more uniform discharge particle size, less pulverized ore particles and higher yield.

3.Convenient: The built-in fineness control device can change the particle size of the discharge by simple adjustment. It can also be equipped with a screening device when discharging, which can ensure that neither over-grinding nor unqualified products are mixed into the finished products.

• Rod Mill Working Principle

The material is fed into the mill by a drum feeder through a spiral cylinder with a hollow shaft. The grinding medium is installed in the barrel body. When the barrel body rotates, the grinding medium is attached to the wall liner surface of the barrel body due to the inertial centrifugal force. After being rotated together with the barrel body and brought to a certain height, the materials in the barrel body are broken by gravity.

 In addition to the cyclic movement of ascending and falling, the grinding medium also causes sliding and rolling in the rotating cylinder body, causing grinding action between the grinding medium, the lining plate and the material to grind the material.

•  OUR COMPANY

•  FAQ

What about the quality of your products?

Our products are manufactured strictly in accordance with the national and international standard, and we always test every equipment before the delivery.

Is the price of products reliable?

Yes, we are manufacturer and we have the strength to give you the lowest price compared with other dealers. However, we have the policy that "According to the quantity order, we will offer the lowest price as possible with our utterly honest attitude towards business ".

In order to help you get a suitable machine and provide you a preferential quotation,

Pls kindly provide the following information:

1. What's the materials to process?

2. What's the feature of the materials? Like density, moisture degree,input particle size and out put particle size.

3. What's your capacity per hour?

4. What's material for the machine?

5.What's the machine you want to buy?A single machine or a production line.