Our plastic balls are produced and tested for use in food applications, cosmetic creation, fluid handling, flow control, petrochemical applications, and even hydraulic fracturing.
Polypropene is a thermoplastic polymer used in a wide variety of applications including packaging and labeling, textiles, stationery, plastic parts and reusable containers of various types, laboratory equipment, loudspeakers, automotive components, and polymer banknotes.
Polypropylene is mostly hard and flexible, particularly when copolymerized is with ethylene. Polypropylene is economical, and can be translucent when uncolored but is not as readily made transparent as polystyrene, acrylic, or certain other plastics. It is often opaque or colored using pigments. Polypropylene has great resistance to fatigue and a melting point of 171ºC (340ºF)
Material | Polypropylene (PP) | ||||
Size | 1mm-150mm | ||||
Grade | G0-G3 (±0.01-0.05mm) | ||||
Density | Around: 0.85g/cm3 | ||||
Advantage | Has good resistance, chemical resistance, low density (density less than water), low water absorption, the highest melting point of the thermoplastic with excellent electrical insulator and low dielectric coefficient, often used for floating capacity requirements, withblood transfusion, level calibration indicator. | ||||
Application | PP ball is mainly used for transfusion, level calibration indicator. |
POM, characterized by its high strength, hardness, and stiffness to ~40ºC., is intrinsically opaque white, but it is available in all colors. POM has a density of 1.410-1.420 g/cm³.
POM homopolymer is a semicrystalline polymer (75-85% crystalline) with a melting point of 175ºCelsius. The POM copolymer has a slightly lower melting point of 162-173ºCelsius.
Material | Delrin | ||||
Size | 1mm-80mm | ||||
Grade | G0-G3 (±0.01-0.05mm) | ||||
Density | Around: 1.4g/cm3 | ||||
Advantage | it is similar to nylon, but slightly harder than nylon, slightly larger than the density recommended products applied to the required low water absorption | ||||
Application | POM ball table and drawer slide device is typically used, bearings, rollers, valves, and electronic apparatus, sailing apparatus. |
Material | PA66( Nylon) | ||||
Size | 1mm-100mm | ||||
Grade | G0-G3 (±0.01-0.05mm) | ||||
Density | Around: 1.1g/cm3 | ||||
Advantage | The nylon has preferably the alkali metal, to adapt to the neutral characteristics of petroleum products and all kinds of chemical products. | ||||
Application | Used in check valve, light load, the knob pull switch, low-cost, but also for better flexibility requirements, high hardness aspects |
Material | Teflon Balls-PTFE | ||||
Size | 1mm-320mm | ||||
Grade | G0-G3 (±0.01-0.05mm) | ||||
Density | 2.1–2.3 g/cm³ | ||||
Advantage | Based frictionless known material having excellent chemical stability, resistance to corrosion, sealing, high lubricity non-tackiness, electrical insulation and good anti-aging Stamina. Continuous use temperature range of -180 ° C to 250 ° C. PTFE (Teflon ®), ball so excellent frictionless known to most corrosive resistant possessed electrically insulating material | ||||
Application | Particularly suitable for use in cryogenic liquids and acids under the conditions of the instrument. |
1.Stable and Qualified Suppliers- More than ten years history
2. Reasonable Price-- Factory suppliers
3. Good Quality--ISO9001; TS16949
4. Prompt Delivery--25-30 days after the deposit.
Q: How long is your delivery time?
A : It is 5-10 days if the goods are in stock. Or it is 25-30days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? Is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.