100# 500SN Group I Base Oil for Automobile Engine Lubricating oil Metalworking Oil
Product Introduction:
No. 100 base oil is distilled with high-quality crude oil under reduced pressure, dewaxed by solvent (dewaxed by solvent is the process of diluting and freezing the lubricating oil crude oil to make the wax crystallize and precipitate, thus reducing the freezing point of base oil) and refined by clay (refined by clay is the process of using the adsorption capacity of activated clay to make all kinds of impurities adsorb on the activated clay, filtering out clay to remove all impurities And become. It has the advantages of good viscosity temperature characteristics, low evaporation loss, excellent low temperature fluidity, good oxidation stability and strong dissolving ability for oxidation products and additives.
Product Application
It is used in the production of medium and high grade lubricating oil (including engine oil, hydraulic oil, gear oil, compressor oil, refrigeration oil, transformer oil, heat transfer oil, quenching oil, metal processing oil, etc.).
It is used in rubber industry (as filling oil).
Product Consideration
It is packed in 200 L galvanized steel drum;
This product is combustible and has fire danger. Open fire is prohibited in storage and use site;
In the process of storage and transportation, the packaging shall be well protected to avoid contamination of impurities and affecting the use of products;
A cool and ventilated warehouse should be stored.
Base oil on-sale products are as follows . You canclick the right Specification and get more information about them . ( Click the Hyperlinks inthe follwoing sheet):
Group I | Group II | Group III | |
15#(60SN) | 32# Non standard base oil | 150BS | 60N |
26#(100SN) | 46# Non standard base oil | KN4010 | 150N |
32#(150SN) | 68# Non standard base oil | SBS | 250N |
46#(200SN) | 4006B | 400N | |
68#(400SN) | 500N | ||
100#(500SN) |