100/200/300 micron carbon/stainless steel self cleaning irrigation filter

100/200/300 micron self cleaning industrial filter

Product structure 

1.Electric motor

2.Automatic drain valve

3:Screen

4:Cleaning brush

5.Water inlet

6.Water outlet

Parameters

How does the self-cleaning filter work?

The water flows through the screen and the particles are retained on the inside of the screen of the filter element. The filtered water then flows out through the outlet.

 When the particles accumulated to a certain number and the pressure differential increases to the pre-determined level, the flushing cycle starts. 

It include two steps: First, the automatic drain valve opens on the drainage outlet. Then, electronic motor drives the cleaning brushes which are inside the screen, the solids are expelled through the drain valve.

Filters continue to supply filtered water even during the flushing cycle.The whole working system is controlled by a smart box which has several control modes: pressure differential, time, manual and PLC.

Product selecting

When you are choosing automatic screen filters, please consider the following parameters:  

·            Flow capacity( Pipe diameter)

·            Filtration range

·            Shell material

·             Pipeline pressure 

·            Chemical properties of the filter medium 

·            Suspended solids(SS) concentration of filter medium 

Pressure Loss Table

FL series Models for choose