Product description:
1. handle winch manual telescopic mast, rising height can be customized 3 ~25 meters.
2. Driven way : handle winch
3 .The manual telescopic mast is made of high strength aluminum alloy, which has these feature of corrosion resistance, lighter weight, high playload capacity, low noise, fast lifting, low impact resistance, long stability etc
3. It can quickly, reliably and safely raise the communication antenna, lighting, camera surveillance imaging equipment to targeting height.it can mount on the vehicle ,wall and ground quickly .
5. The working ant-i-wind Level >= 8 level or /19m/SEC.
6. Automatic protection device when you operate wrongly
7. Equipped with nails ,guy wires ,tripod to insure safety
8. Simply operate and less maintenance ( only add grease per half of year
Manual telescopic mast installation instructions and precautions:
1.fixed in ground
a.Wherever it is installed, it must be insure there is right angle between ground and mast pole ,make sure the gound is firm and flat ,otherwise it is dangerous and maybe cause lose .
b. Set up and strentch the tripod ,and insert the nail stake into the gound to fix the mast tube
c. Insert/hang the guy wire into pull-ring on the tube and the other point strentch to the nail anf fixed if the mast height >=10m , the 3 guy wire will be tighten at the same time it is mandotory procedure ,otherwise it has safety issue .
dc.If the the wind speed >14m/s ,you'd better stop or operate with guy wire
e. Must have two people to operate on site to make sure it is safe .
f. Guy wire fixed: manual telescopic mast needs to be installed in a fixed object,no shake, such as walls, car body, foundation and so on. The fixed points should be two points at least, one of them in the manual telescopic mast tube , the distance between the two points is greater than 2/3 height of the manual telescopic mast. The connection should be firm and reliable.
g , the lifting & descend speed is controlled with 1m /s ,too fast maybe lock ,meanwhile check the steel guy lines is loosen or not ,if ye s,please tighten the guy wires before continue
h.Turn it in counterclockwise, the mast descends under loading. (If the load capacity is less than 5KG, you could pull down the guy wire of the upper section while turn it in counterclockwise to descend the mast.)
i. fixed on the vehicle : Must mounting/welding the bottom bracket and hose clamps on the vehicle before deploy the telescopic mast
j : the top playload can't be overloading ,otherwise it is very dangerous .
the parameters for 10m ,it also can be customized based on customer demand :
Model | BSM-SD-1000A | |
Rising height (mm) | 10000 | |
Sections | 6 | |
Retraction height (mm) | 2100 | |
Max Diameter (mm) | 108 | |
min Diameter (mm) | 40 | |
Top playload (kg) | 15 | |
Color | Bronze or army green | |
Accessory | guy wire ,tripod ,nail stake ,handle winch and bottom circle plate | |
Lifting or Driven way | handle winch | |
Packing | Exporting wooden package |
Model | BSM-SD-1000B | |
Rising height (mm) | 10000 | |
Sections | 8 | |
Retraction height (mm) | 1800 | |
Max Diameter (mm) | 132 | |
min Diameter (mm) | 40 | |
Top playload (kg) | 15 | |
Color | Bronze or army green | |
Accessory | guy wire ,tripod ,nail stake ,handle winch and bottom circle plate | |
Lifting or Driven way | handle winch | |
Packing | Exporting wooden package |
1.Quickly response with 24 hours for any questions and issues
2.provide official test report
3. Specific exporting package and provide the tracking number against any parcels
4. provide customized service for customers request
5. OEM/ODE order is appreciated
Q1. What is your terms of payment?
A: We accept T/T(Telegraphic Transfer),Western Union or Paypal ,also will sign official contract before payment.
Q2,What is your minimum order quantity?
A: MOQ 1 PCS
Q3. What is your sample policy?
A: we can provide sample if customer can absorb the cost and logistic cost ,also appreciated you come to our office to validate the sample.
Q4. Have you the export certificates and test report ?
A: Yes, we will provide the test report and export certificate ( CE/FCC etc ..)
Q5: What is quality guarantee policy ?
A:Normally guarantee term is 1 years ,we offer 2 years PTZ main body and 1 year for camera
Q6: Do you accept OEM/ODM?
A:Yes! We accept to label your brand if you would like .