10" 226 Code 7 PES Membrane Filter Cartridge For Pure Water

10" 226 Code 7 PES Membrane Filter Cartridge For Pure Water

These PES membrane filters are constructed of absolute rated, hydrophilic polyethersulfone (PES) membrane and polypropylene components.

Polyethersulfone (PES) is low protein binding and excellent resistant to hydrolysis, therefore a good choice for terminal filtration(bacterial removal) of water treatment, food&beverage, pharmaceutical, chemicals(inks) applications, etc.

1. Absolute rate inherently hydrophilic PES membrane filter for sterilizing grade filtration;

2. Highly asymmetric PES membrane provides high dirt holding capacity and longer service life;

3. Higher throughput and flow-rate than any other sterilizing grade filter cartridge;

4. Low protein binding, suit for a broad range of pharmaceutical products;

5. Excellent resistance to hydrolysis allows use in Ultra Pure Water(UPW) system;

>Sterile filtration for mineral water, wine, beer and other beverages;

>Bacteria removal of API, LPV, Blood serum, buggers, reagents, diagnostics, other pharmaceuticals;

>Ultrapure water and disk, display, multi silicone process water in electronics;

>Fine chemicals, water process; 

Materials Of Construction		Filter Media:		Asymmetric PES Membrane
		Support Layers:		Polypropylene
		Micron Rating:		0.1, 0.20, 0.45, 0.65, 1.0 um
		Inner Core:		Polypropylene
		Cage, adapter:		Polypropylene
		Seal Method:		Thermal Bonded, No Adhesives
		O-rings/gaskets:		Silicone, Nitrile, EPDM, PTFE, etc
Cartridge Dimensions		Outer Diameter		69mm
		Inner Diameter		33mm
		Length		5, 10, 20, 30, 40 Inch
		Filtration Area(m2)		0.65 m2 per 10''
		End Cap:		226/Fin(Code 7), 222/Fin, DOE, etc
Operating conditions		Normal Operating Temp.:		Up to 60℃ (140℉)
		Max.Operating Temp.:		85℃ (185℉) at P≤1.0 bar (14.5psi)
		Max. Differential Pressure
		Normal Flow Direction:		4.2 bar (60.9 psi) at 25℃ (77℉)
		Reverse Flow Direction:		2.1 bar (30.5 psi) at  25℃ (77℉).
		PH Value compatibility:		2-13
		Sterilization:		Steam Sterilization for 30 minutes at 121±2 ℃, Cumulative Time:8 hours;
Typical water flow rate @ 25 ℃ (10")
Cartridge Safety		Endotoxin:		<0.25 EU/ml
		Extractables:		0.03g / 10"