10-15mm polished edges round corner water jet cutting tempered glass sliding doors

We can produce high quality products by using the best float glass, the most advanced equipment, combined with the most professional technology. 

    Tempered glass are made by forming compressive stress on the surface of the glass by heating the glass up to its intenerating temperature and then make the glass uniform cooling quickly. During the process of cooling, the exterior part of the glass is solidified because of the rapid cooling, while the interior part of the glass shrinks because of slow cooling, then forming compressive stress on the surface of the glass and tensile stress inside the glass, thus improving the intensity and heat stability of the glass.

   We are the general selling agent and the production Base of Pilkington's Low-E online, offline glass in Shandong Market, We can supply high quality Low-e tempered, Low-E insulated and Low-E laminated glass.

Our products have passed CE, Australia, and ISO9001:2008 and CCC test. 

Product characteristic:

1, Safety: After breaking to fragments, not to hurt body.

2, High intensity: It has 4-5 times strength than ordinary glass.

3, Hot stability: It has good hot stability, which can endure 3 times temperature than ordinary glass, also can endure changing of above 200°C.

Products Specification
Thickness: 3-19mm
Max specification:

Flat tempered glass 3000*8000mm;

Curved tempered glass 3000*5000mm
R>=1500mm.

Equipment:

Finland TAMGLASS GHF Convection Furnace

Taiwan Tongchang Horizontal Glass Toughening Furnace

Luoyang North glass Horizontal Roller Glass Toughening Furnace

IF ANY OF OUR PRODUCTS WAKE YOUR INTEREST, PLEASE CONTACT US.

Contacts: James Hu

Tel: +86-531-88802996

Mobile: +86-155 5256 0510