HBS VACUUM PUMP
Product description |
MODEL |
RS-2 |
|
VOLTAGE |
110V |
|
60Hz |
||
FREE AIR DISPLACEMENT |
CFM |
5 |
ULTIMATE VACUUM |
Pa |
5 |
mbar |
0.05 |
|
ROTATING SPEED |
RPM |
1720 |
POWER |
HP |
1/3 |
OIL CAPACITY |
ml |
250 |
DIMENSION |
mm |
290*120*240 |
WEIGHT |
kg |
8.5 |
Product pictures |
The front of Rotarty vacuum pump
♦ Wide visible inspector sight glass.
♦ Oil drain plug at the bottom of the oil tank.
The side of portable vacuum pump
SIDE VIEW
♦ Light and low surface temperature of alloy aluminium casting.
♦ Convenient portable handle.
The behind of Rotary vacuum pump
♦ Easy control by on/off power switch.
♦ Integrated connector for different optional power plug.
Threaded port for optional inlet valve.
HBS VACUUM PUMP
PACKAGE
Exploded Drawing Of portable suction pump
FAQ
Q1. Are you factory or trading compangy?
A: we are professional manufacturer of vacuum equipment and we have our own factory
Q2. if you can accept sample order ?
A: Yes, you can order one piece for test and check quality. Mixed samples also acceptable. But please note that express(freight) charge by your own side.
Q3. What about the lead time?
A:Sample need a week, quantity order within 30 days after deposit.
Q4. Do you have any MOQ limit ?
A:No, but the price discrimination
Q5. Do you accept OEM
A: Yes
Q6: How about the product’s warranty?
A: we offer 1years warranty to our products.
HBS VACUUM PUMP
Instructions |
1.Maintenance
1.Keep the pump clean and prevent foreign matter from entering it.
2.Keep the oil level. Do not keep it running without oil.
3.Keep the oil clean. If it becomes dirty, muddy or has water or other volatile substances which affect limit vacuum the oil should be replaced. Before replacing the oil, start the pump and have it run about 30 minutes to make the oil thin and then stop it and let out the oil from the oil-outing mouth. Then have it run for 1-2 minutes with the gas-entering mouth open. During this time, add a small quantity of clean oil from the gas.Entering mouth so as to replace the remaining oil in the pump. Do it repeatedly. After making sure the pump is clean put on the oil-outing screw plug and then fill clean pump oil to the oil-level line from the oiling mouth.
4.If it is not in use for long, cover the oiling cap and exhaust cap and put it in a dry place. Meanwhile, damp proof and anti-rust should be considered.
5.If it needs removing and fixing is sure to have an experienced or professional technician one does it.
2.Precautions
1.Do not pump inflammable, explosive and poisonous gases.
2.Do not pump gases which can corrode metals and can exert chemical changes with the pump oil.
3.Do not pump gases containing pellet dust and gases with plenty of steam.
4.The temperature of the pumped gas should not be over 80° and the environment temperature should be 5 - 6.
5.Do not use it as a compression or a convey pump.
6.Do not use or operate without oil.
7.Do not pull on the wire when unplugging from the outlet.
8.Do not put heavy weights on the wire to avoid being extruded.
9.Do not use when the plug or outlet if it is damaged.
10. Do not plug or unplug with your wet hands.
11.Unplug or switch off the machine when there is any kind of leak of coal gas.
Company information |
The exhibition |
Certification |