ac motor use on slitting machine YL7124 370w
CONDITIONS
Ambient temperature | -15℃<0<40℃ |
Altitude | Not exceed 1000m |
Rated voltage | 220v,110v~240v is available |
Rated frequency | 50HZ/60HZ |
Duty | S1(continuous) |
Insulation class | B,F,H |
Protection class | IP54,IP55 |
Coolong method | IC0141 |
Notice:
1.The wiring in the correct way
2.The motor should not be run idle for a long time or overload operation and blocked at low speed,so as to avoid high temperature
3.Don't haul the motor speed so hard,so as not to snap the internal coil
4.Gear reducer have assembly well please don't open it or reinstall it,in order to avoid the dust or gear mesh noise
5.Motor and gear reducer of the shaft in connected to the load can't knock gravity,extrusion,lest cause internal deforma-tion and severe noise or stuck phenomenon
Product work environment:
Wide range of the speed of the motor,speed control features smooth;
Working environment:Altitude≤2500m;Ambient temperature:-20℃~+60℃;Relative humidity<90%,
Storage environment requirements:Humidity of the air:-5℃~+35℃,Relative hhumidity;<70%;Well ventilated,without corrosive gas.