1 Micron PVDF PES membrane Water Filter Cartridge In Line
Product Description
The hydrophilic PVDF membrane pleated filter cartridge is constructed of imported hydrophilic PVDF membrane filter media and PP support layers. All construction process are thermally welded without using any glue or adhesives to get low extraction level. The low protein binding and good chemicalcompatibility make it suit for a broad range of pharmaceutical products and water solvent.
Features
1. Hydrophilic PVDF membrane filter for liquids sterile filtration, absolute rating ≥99.99%
2. Low protein binding and low extraction, ideal for bioburden reduction and particle removal
3. High throughput flow rate with minimal differential pressure
4. Broad chemical compatibility, suitable for aggressive, high viscosity liquids
5. Withstand multiple steam sterilization
PVDF for gas filtration |
PVDF membrane for gas filtration |
||||||||||
Absolute Rating
|
Filtration effective is ≥99.99% |
||||||||||
Minimum pore size is 0.1um, suitable for critical gas filtration |
|||||||||||
Wide Chemical compatability
|
Suitable for strong alkaline and acid enviroment |
||||||||||
Resistance to the halogens and oxide |
|||||||||||
Effective Filtration Area |
0.65M2 per 10" |
||||||||||
Materials
|
Filter Media: PVDF Membrane |
||||||||||
PVDF Membrane: Polypropylene |
|||||||||||
Inner core: Polypropylene /SUS304 |
|||||||||||
Outer Support: Reinforced Polypropylene Cage |
|||||||||||
Adapter: Polypropylene |
|||||||||||
Cartridge Dimensions (Nominal)
|
Outer Diameter: 69mm (2.75") |
||||||||||
Inner Diameter: 33mm (1.30") |
|||||||||||
Length: 10"- 254mm |
|||||||||||
20"- 508mm |
|||||||||||
30"-762 mm |
|||||||||||
40"- 1016mm * (Length is based on DOE Adapter) |
|||||||||||
Cartridge Purity
|
Standard: Clean and flushed with Pyrogen-free water |
||||||||||
Rinse: up to 17-18MΩ.cm with a minimum of throughput |
|||||||||||
Vacuum packing |
|||||||||||
Table 1:Typical air flow rate (10") |
|
||||||||||
Typical Applications |
Fermentation air; Tank vent;Compressed air;Sterile process gases;Ultrafine particles existed in air |
||||||||||
Table 2:Liquid Retention Ratings(um) Test |
|
||||||||||
Operating Conditions
|
Normal Operating Temperature: Up to 65℃ (149℉) |
||||||||||
Max.Operating Temperature.: 90℃ (194℉)at P≤1.0 bar (14psi) |
|||||||||||
Max. Differential Pressure: Normal Flow direction 4.2 bar (60 psi) at 25℃ (77℉); |
|||||||||||
Reverse flow direction 2.1 bar (30psi) at 25℃ (77℉) |
|||||||||||
PH Value compatibility: 1-13 |
|||||||||||
Sterilization
|
Steam Sterilization for 30 minutes at 135℃(275℉) |
||||||||||
Cumulative Time: 50hours |
|||||||||||
Materials Safety
|
Meet the current FDA and 2002/72/EC standard |
||||||||||
Endotoxin: <0.25 EU/ml |
|||||||||||
Extractables: 0.03g/ 10" |
|||||||||||
Table 3: 100% Integrity Test |
|
ORDER INFORMATION
GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET |
P-PHARMACEUTICAL | DPV | 020-0.2um | AA- DOE | 10-10" | S-silicone; N-nitrile |
F- FOOD & BEVERAGE | 045-0.45um | CN-226/FIN | 20-20" | E-epdm ; T-teflon (encaptulated) | |
100-1.0um | BN-222/FIN | 30-30" | V-viton | ||
BF-222/ FLAT SEAL | 40-40" | How to Order?- Example | |||
CF-226/FLAT SEAL | 05-5" |
Pharmaceutical grade; Micron:0.45um; Length:10" ADAPTER: DOE; Gakset: Silicone. Selection Code is: PDPV045AA10S |
|||
EN-222 three locking ears /Fin | Other-XX |
1,24-hour Response
We responds any request from our clients within 24 hours, saving your time and labor.
2,Supporting System
The system consists of claims systems, technical support system, inquiry system and ordering following system. The system will provide after-sales service in full range.
3,Free Training
We provide free training to all of our clients and distributors. The training will give you ample knowledge of our product, and make it easy for your work.
4,Free Storage Area
We are providing free storage area to our client,to achieve mix loading purposes.
1.What products you can provide currently?
Syringe Filters, Sample Vials, Membrane Filter, Filter Paper, Vacuum Pump, Filtration Manifolds, SPE Cartridges, Flash Columns, HPLC Columns, Filter Cartridge, Pipette.
2.Can you provide us a competitive price and good quality products?
We have our strict evaluation criteria of quality on our partner factory; COA is shipped with your products if you ask. We did complete and detailed market research and priced competitively.
3.What is the charge standard about the Samples?
1) For our first cooperation, buyer afford the sample fee and shipping cost, and the cost will be refund when made formal order. 2) For our old customer, we will send free sample , even though new designs sample, when have stocks. 3) Sample delivery date is within 1-2days, if have stocks; Customer design is about 3-7 days.
4.What are the Payment Term ?
We can accept L/C, T/T, Western Union, MoneyGram, Paypal.
5.What are the Shipping methods ?
If your order is not big enough , Door to Door Service is the best choice via UPS,FEDEX,DHL,EMS. For big quantity, by air or by sea through your forwarder is one Normal Way , we also can provide cost-effective forwarder for your reference. If you want to know more information about our products. Send your inquiry detail in the below for free sample,Click "Send" now!
Sales Enginner :Fiona Li
Whats app:+86 18538816823
EMail:lyy(at)tsjmlc.com