1 HP vacuum pump14cfm hvac vacuum pump with low price pump

Description:

· Dual voltage vacuum pump: it can be custom-made in different voltages, like 220V/50Hz and 110V/60Hz.

· High efficiency and low noise, heavy-duty aluminum alloy casing.

· Oil drain plug positioned at Bottom of oil tank. Internal high volume cooling fan for extended use life,it is thermally protected.

· Exhaust port with exhaust cap, direct drive motor allowing easy starting which is maintenance free.

· Large oil sight glass for monitoring oil levels, ON/OFF switch.

· Non slip cushion handle, the vacuum pump will be packaged with a bottle of vacuum pump oil when delivered.

· Environmental Design - The tank has been equipped with separating devices at the exhaust port to prevent oil spraying and to reduce pollution.

· Oil anti-backflow valve design: The gas inlet is specially designed to prevent oil from flowing back and polluting the container and hoses when stop pumping.

· The pump is specially designed for low temperature environment, and large starting torque guarantees to start normally under cold winter’s extreme low temperature.

· Used the full cooper wire motor.Maintenance Free Direct Drive Motor.

· Diverse color for free choice, other colour can be customized by customers’ requirements.

· Low noise and long service life.

· Heavy duty rotors and bearings

· Heavy duty steel handle with lift hook for well-balanced carrying

· Tethered port caps stay with the pump

· Metal with rubber overlay base for stability

Applications:

RS series oil sealed rotary vacuum pump,engine vacuum pumps or auto vacuum pumps are widely applicable to air conditioning, refrigeration system, food packaging, scientific research, medical equipment, automobile industry, petrochemical and other fields.It is also used as the laboratory vacuum pump for filtration, industrial vacuum systems,milker vacuum pump,ac evacuation pump,vacuum pump filter,brake bleeder vacuum pump,etc.

Specifications:

Exploded Drawing Of Single Stage Vacuum Pump

1.Maintenance

1.Keep the pump clean and prevent foreign matter from entering it.

2.Keep the oil level. Do not keep it running without oil.

3.Keep the oil clean. If it becomes dirty, muddy or has water or other volatile substances which affect limit vacuum the oil should be replaced. Before replacing the oil, start the pump and have it run about 30 minutes to make the oil thin and then stop it and let out the oil from the oil-outing mouth. Then have it run for 1-2 minutes with the gas-entering mouth open. During this time, add a small quantity of clean oil from the gas.Entering mouth so as to replace the remaining oil in the pump. Do it repeatedly. After making sure the pump is clean put on the oil-outing screw plug and then fill clean pump oil to the oil-level line from the oiling mouth.

4.If it is not in use for long, cover the oiling cap and exhaust cap and put it in a dry place. Meanwhile, damp proof and anti-rust should be considered.

5.If it needs removing and fixing is sure to have an experienced or professional technician one does it.

2.Precautions

1.Do not pump inflammable, explosive and poisonous gases.

2.Do not pump gases which can corrode metals and can exert chemical changes with the pump oil.

3.Do not pump gases containing pellet dust and gases with plenty of steam.

4.The temperature of the pumped gas should not be over 80° and the environment temperature should be 5 - 6.

5.Do not use it as a compression or a convey pump.

6.Do not use or operate without oil.

7.Do not pull on the wire when unplugging from the outlet.

8.Do not put heavy weights on the wire to avoid being extruded.

9.Do not use when the plug or outlet if it is damaged.

10. Do not plug or unplug with your wet hands.

11.Unplug or switch off the machine when there is any kind of leak of coal gas.

 Contact:

Phone:+86 1

QQ:2120865441

Wechat:+86 13957635461

Address: New Economic Development Zone ,Wenling,Zhejiang ,China