PON remote amplifier is a PON link amplifier developed independently by Visint®. It follows ITU-T G.984.X and IEEE802.3ah standards, integrates PON technology and photoelectric conversion technology, realizes the extension of PON signal, and maximizes the coverage of GPON/60KM and EPON/40KM. It is fully suitable to the mainstream OLP/ONU devices in the market. It is suitable for the scenario of PON coverage with distance extension and line loss. No configuration required and completely transparent transmission, fast open, and improves the coverage efficiency of FTTH services.
uCompatible with G/EPON services, the maximum remote distance: EPON/40KM, GPON/60KM.
uTransparent protocol, low delay and good compatibility. It can be fully compatible with the mainstream OLT/ONU devices in the market.
uSupporting IEEE802.3ah, ITU-T G.984.X and national standard YD/T 1475-2006, supporting PON signal multi-level cascading.
uSupporting 3R (Re-amplifying, Re-shaping, Re-timing), supporting multi-level PON service amplification, optical module supports hot swapping.
uEffectively improve the utilization of OLT ports, increase the maximum spectrum of EPON from 1:32 to 1:64, and the maximum spectrum of GPON from 1:64 to 1:128.
System Parameter | Technical Index | |
Supports protocols | EPON (IEEE802.3ah), GPON (ITU-T G984.X). | |
Upstream | 1.25G Burst signal. | |
Downstream | 2.488G continuous signal (GPON), 1.25G continuous signal (EPON). | |
Compatibility | Compatible with OLT and ONU equipment of different manufacturer, supports business transparent transmission. | |
Receiving sensitivity on OLT side | -30~-3 dBm (1.25G). | |
Receiving sensitivity on ONU side | -28~-8dBm (Burst signal). | |
OLT side emission Power | 1dBm. | |
ONU side emission power | 2dBm. | |
Environmental requirements | Working temperature | -10℃ ~ 70℃. |
Storage temperature | -40℃ ~ 80℃. | |
Relative humidity | 5% ~ 95%. | |
Power consumption | <7W. | |
MTBF | 128053 hours. |