1.5kw spindle cnc router machine for plexiglass
Discription | Parameter |
X,Y,Z Working Area | 600x900x100mm |
Table Size | 720X1140mm |
X,Y,Z Traveling Positioning Accuracy | ±0.01/300mm |
X,Y,Z repositioning Positioning Accuracy | ±0.01mm |
Table Surface | T-slot table |
Frame | Steel structure |
X, Z Structure | Ball Screw |
Y Structure | Hiwin Rail Linear Bearings and Ball Screw |
Max. power Consumption | 0.8Kw(without spindle) |
Max.Rapid Travel Rate | 6000mm/min |
Max.Working Speed | 5000mm/min |
Spindle Power Motor | 1.5KW water cooling spindle |
Spindle Speed | 0-18000RPM |
Drive Motors | Stepper system |
Working Voltage | AC220V/50/60Hz |
Command Language | G code |
Operating System | DSP System (Mach3 PC Software) |
Interface | USB |
Flash Memory | 128M(U Disk) |
Collet | ER11 |
X,Y Resolution | <0.01mm |
Software Compatability | Type3 software, Wentai software, (Option:Artcam software) |
Model | CONFIGURATION |
UT-6090 | 1.5kw water cooled spindle |
XZ axis by 57,Y axis by 450A stepper motor; JMC 860 driver | |
Xinfutai inverter | |
XYZ axis by Taiwan TBI ball screw | |
Taiwan HIWIN /PMT linear guide rail, diameter of 20mm | |
Square pipe welding bed structure. | |
Electronic inductance limit switch. | |
Tool sensor | |
Tool box(parameter list/controller install software/drawing software/etc),cutters, etc. |
1. Advertising industry: cutting/engraving/drilling/photo engraving, cutting, drilling on wood, MDF, bamboo, plastic, PVC, acrylic, two colors board, metals, stone etc.
2. Manufacturing industry: engrave, cut, drill, photo engraving on copper, iron and aluminum, alloy, steel etc.
3. Furniture making: wood door cutting, wood door artwork engraving, wave boards making, 3d photo engraving, small or large relief works, cylinder materials engraving, 3d photo engraving etc.
4. Artwork industry: Figure engraving, character engraving and cutting, name brand making, small gift cutting, souvenirs making, Carving various decoration letters, figures on small windows, fences, wall, etc.
5. Model making: Cut materials into different shapes for models making.
6. Stamps making industry: Carving on many different materials like rubber, acrylic, cattle horn, plastic, wood and ink storage materials and so on.