Product Name | Car roof Film |
Material | PET (Polyester Film) |
Heat resistance | -50°C to +200°C |
Durability period | Indoor: 3-5 years; outdoor: 2 years |
UV Rejection(UVR) |
99% |
Size | 1.52x15m/ 1.35x15m Customized Size is available) |
Color | Black |
INSTALLATION STEPS: |
1.Measure and cut the film size. |
2. Clean the car roof with soapy water. |
3. Spray a light film of water on inside glass and film. |
4. Peel film apart from backing on outside the car roof. |
5. Flatten the surface and remove bubbles if possible. |
6. Cut the excessive according to the shape of the roof with the blade provided. |
7. Spray film with soapy water solution and squeeze firmly. |
8. Dry in full sun for 3 days if available |
9. Finished. |
1. Q: How much vinyl does it take to wrap a car?
A: For a car with 4 seats, 15 meters is enough without any mistakes. 1 roll of size 1.52x30m
could be used for 2 cars. A larger car will obviously take a little more, about 20meters for a SUV.
2. Q: What application method do we use on this film?
A: This film should be used with the dry application method after the surface has been cleaned
and no oils, grease, wax, or other contaminants are on the surface.
3. Q: How long will this vinyl last?
A: A professionally applied vehicle wrap will last between 3 and 5 years.
4. Q: Would it hurt car paint after removing?
A: Installing the film on car body will not hurt the paint. Also, it is extremely easy to remove it.
After removing, will never leaving glue and any residue left on the car body. Car paint will remain what
it looks like before installation.