PUMP SPECIFICATIONS
·Usage: |
Water for industrial ,mineral industries & agriculture |
·Type: |
QJ Series Water-Submersible Pump |
·PH Value: |
6.5-8.5 |
·Sulfur content |
Max:1.5mg/l |
·Chlorine content |
Max:400mg/l |
.Solid content Weight |
Max:0.01% |
·Temperature |
Max.: 20 ℃ |
·Drive |
Electric |
·Impeller |
Cast iron HT200 or ZCuSn3Zn8Pb6Ni1 |
·Shaft Sleeve |
Stainless steel 2Gr13 |
Recommended Products
200 QJ (R / H) 80--144
200- Minimum well inner diameter (Unit,mm). It also includes types of 100,150,200,250,300,etc.
QJ- Submersible water pump for Chinese abbreviation
R- water temperature for QJ: 20±5°C, QJR: 25±105°C
H- PH value: 1-14
80- Flow capacity(Unit:m3/h),the flow capacity in a unit time should be less than its water inflow quantity.
144- Head(Unit:m),vertical distance between the dyanamic water level and waterhead.
Type | Max. power | Capacity | Head | Speed | Outlet diameter | Outlet diameter |
(kw) | (m³/h) | (m) | (r/min) | (mm) | ||
150QJ-10-28 | 3.5 | 10 | 28 | 2850 | 143 | 2″ |
150QJ-20-85 | 11 | 20 | 85 | 2850 | 143 | 2″ |
150QJ-32-128 | 25 | 32 | 128 | 2850 | 143 | 3″ |
150QJ-50-125 | 45 | 50 | 125 | 2850 | 150 | 3″ |
200QJ-10-274 | 30 | 10 | 274 | 2850 | 184 | DN50 |
200QJ-40-13 | 4 | 40 | 13 | 2850 | 184 | 3″ |
200QJ-63-300 | 92 | 63 | 300 | 2850 | 184 | 4″ |
200QJ-100-270 | 120 | 80 | 270 | 2850 | 184 | 4″ |
400QJ 650-91 | 410 | 650 | 91 | 2850 | 360 | 10″ |
QJ Series Water-Submersible Pump
QJ series water-submersible pump is vertical,centrifugal,multistage submersible pump.It is built with different materials of construction together with extremely hard wearing bushes, which makes this pump highly durable, which are precisely designed by our highly experienced team of engineers using the advanced technology system to meet the international quality standard.
Deep well water submersible Pump Spare Parts Series
* Other pump parts options are available.
Application
1. Deliver deep well water
2. Irrigation
3. Drink for life
4. Wast water dewatering
Advantage
The optimal design of the submersible impellers and diffusers offers best possible hydraulic efficiency. |
These pumps are powered by water filled, rewindable submersible motor suitable for continues duty. |
The pump stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss steel lamination assembled under pressure and rigidly locked in stator shell. |
Specially designed high performance thrust bearings (s.s with carbon) are used to withstand axial and down thrust loads with minimum wear and tear. |
Dynamically balanced rotor gives vibration free and noise free operation, thereby increases efficiency and life cycle of the motor. |
1. What is your product range?
Slurry pumps(Horizontal, vertical, submersible type.)
Water pumps(Multistage, end suction, double suction)
2. What information I need to offer for quotation?
Liquid:___ Pump Capacity___m3/h
PH:_____ Pump Head: ___m
Specific of gravity___ Voltage ___V Frequency ___Hz
3. Do you only supply pumps? Could you supply driven equipment?
Yes, sure ,the pumps could be coupled with motor and diesel engine, below brands for your reference:
Motor: WEG, SIMENS ,ABB, TECO ,and Chinese brands
Diesel engine: Cummins, Deutz, Perkins,Volvo,MITSUBISHI, Caterpiller,MTU,and Chinese brands.
4. What is your MOQ?
We value every client, no matter pump or spare parts, one set or one piece, we treat the same with 100sets.
5. Is OEM parts available ?
Yes, please send me the detailed drawing. Different materials is available.