1-1/2" tri-clamp with cooling element flush diaphragm pressure sensor/transducer/transmitter
1-1/2" tri-clamp with cooling element flush diaphragm pressure sensor/transducer/transmitter
Product Overview
PM310 is made from high-quality silicon Piezoresistive chip. All process connections of the flush pressure
transmitter are made of stainless steel, fully welded and isolate the process medium from the pressure measuring instrument via a positive seal. The PM310 is precision engineered to fit food, pharmaceutical and chemical liquid pressure measurement.
A wide range of process connection and electrical connection options are available to meet almost requirement.
Features
- Pressure measuring ranges from 1bar to 100bar
- Absolute, gauge and sealed gauge
- Accuracy: ±0.5%FSO
- Calibrated and temperature compensated
- Flush diaphragm construction
- Piezoresistive pressure sensor design
- Variety of Pressure & Electrical connections
- Output 4...20mA,0...10V,0...5V and others
stainless steel case IP68 diaphragm pressure transmitter in high-humidity environments Applications
- Process control systems
- Food and beverage
- Medical
- Papermaking
- Dairy
Product details of PM300-Flush Diaphragm pressure transmitter for Food and Beverage Industry
Performance Specifications
Parameter | Value | Units | |
General | Pressure Range | 0-0.1,...,100 | bar |
Overpressure | 1.5xFS | bar | |
Environmental | Operating Temp.Range | -20 to +80 | °C |
Compensated Temp.Range | 0 to 50 | °C | |
Vibration | 10 | g(20 to 2000Hz) | |
Shock | 100 | g(10ms) | |
Cycles | 10x106 | cycles | |
Electrical @25°C(77°F) | Output Signal /Supply Voltage | 4...20 mA: 24 (12...36) VDC 0...5 VDC: 24 (12...36) VDC 1...5 VDC: 24 (12...36) VDC 0...10 VDC: 24 (15...36) VDC 0.5...4.5 VDC: 5 VDC (ratiometric) |
|
Load Resistance | <(Vs-12)/0.02A (For current output) >10kΩ (For voltage output) |
| |
Insulation Resistance | 100 | MΩ@50VDC | |
Physical Specifications | Media Compatibility | All media compatible with 316L SS |
|
Housing | 304 stainless steel |
| |
Diaphragm | 316L stainless steel |
| |
Seal Ring | Viton or NBR |
| |
Oil Filling | Silicone oil |
| |
Protection | IP65,IP67 |
| |
Net Weight | Approx.295g |
| |
Performance1 | Accuracy2 | ±0.5[typ.] | % FSO |
Temp. Coeff– Zero3 | ±1.5[typ.] | % FSO | |
Temp. Coeff– Span3 | ±1.5[typ.] | % FSO | |
Long-Term Stability | ±0.3[typ.] | % FSO | |
Notes 1. All values measured at 25°C(77°F) 2. Including non-linearity, hysteresis and repeatability. 3. 0°C to 50°C(32°F to122°F) with reference to 25°C(77°F). The listed specifications and dimensions are subject to change without prior notice. | |||
1-1/2" tri-clamp with cooling element flush diaphragm pressure sensor/transducer/transmitter Dimensions in mm
Connection Diagrams
Product testing diagram
Mounting location
Ordering Information
Note: Please contact us for product Datasheet
Model / Measuring range / Output signal / Supply Voltage / Electrical connection / Process connection
Correct specification examples: PM20S - 0~10barG - 4~20mA - 24VDC - DIN43650 - G1/4 male
Custom Sensors: Four Steps to Get Your Custom Sensor
1. Concept
We will work closely with you to analyze your measurement task and design the matching solution. Through rapid engineering (CAD) you get first concepts for your transducer in a short time. Advice on conceptual design is free for you.
2. Quote
After having agreed the concept with you, we provide you with a quote for the customized transducer that really meets your unique requirements.
3. Prototype
Get a prototype of your sensors in a short time... Rapid prototyping makes it possible.
4. Production
If the prototype meets your requirements, production starts. Benefit from the proven quality and delivery reliability of the leading manufacturer with decades of experience.
Calibration services
Repair Services
Rush repairs are turned around in little as 48-72 hours whether it's a standard or custom design.
Non-rush repairs are returned to you in 10 working days.
Can you provide calibration report of flush diaphragm pressure sensor ?
Yes, VOLLTEL can provide calibration report.
Can you accept OEM brand?
Yes, VOLLTEL can accept OEM brand without extra charge.
Can you offer sample for flush diaphragm pressure sensor?
Yes, you can apply for sample testing.
Warranty=?
12 months (option 18 months)
How long will you give me the reply?
we will contact you in 12 hours as soon as we can.
What pressure range should I work in?
A gauge range of twice the working pressure is generally selected. The working pressure in all cases should be limited to 75% of the gauge range. Where alternative pressure and pulsation are encountered, working pressure should be limited to 2/3 of the gauge range
What do I need to know to select the right product?
The following are the basics for most products used in industrial environments: Application - Pressure range - Temperature range - Medium - Pressure Connection
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier