* Safer and less cleanup required. * Work well with all 28° to 34° framing nailers. * Hot dipped galvanized for uses in ACQ treated lumber. * Great holding power and resistant to bending. * Meet all applicable ASTM standards. * Fit performance standards for building codes.
SPECIFICATION
* Material: carbon steel, stainless steel. * Diameter: 0.113" – 0.160". * Length: 1" – 3-1/2". * Collation type: high performance paper tape. * Collation angle: 28° – 40°. * Head: round head and D (clipped) head. * Shank type: smooth, ring, Spiral * Point: diamond. * Surface treatment: bright, electro galvanized, hot dipped galvanized. * Package: supplied in both retailer and bulk packs. 1000/2000/3000 pcs/carton.
Shank Type Smooth Shank Smooth shank nails are the most common and are often used for framing and general construction applications. They offer enough holding power for most everyday use.
Ring Shank Ring shank nails offer superior holding power over smooth shank nails because the wood fills in the crevasse of the rings and also provide friction to help prevent the nail from backing out over time. A ring shank nail is often used in softer types of wood where splitting is not an issue.
Sipral Shank A sipral shank nail is generally used in hard woods to prevent the wood from splitting while the fastener is being driven. The fastener spins while being driven (like a screw) which creates a tight groove that makes the fastener less likely to back out