0 to 300.00g/cm3 Range Lab Electronic Solid Density Meter Digital Densiometer Specific Gravity Meter For rubber plastics cables
Introduction
The device can be extensively used in m any nonmetal industries including electronics , rubber, plastics, electric wires and cables, automobile parts, ferrites, powder metallurgy, food, beverage , perfumery compounds, f1avors and cosmetics, etc
The instrument fully conforms to following standards
GB/T11 540 -2008 Fragrance/Flavor substances - Determination of relative density
GB/T61 1- 2006 Chemical reagent - General method for the determination of density
GB/TI463-2005 Test methods for density and relative density of fiber reinforced plastics
JJG 171 -2004 Relative Density Balance for Liquid
GB/T5009.2 - 2003 Determination of relative density of foods
GB 1 033-1 986 Test method for density and relative density of plasticbr
The measurement can be completed in only several a few steps, the data is accurate, and the operation is simple and rapid
Step 1: Enter the solid density measuring mode
Step2: Put the sample on the upper weighing disc
Step3: Put the sample on the lower weighing disc
Slep4: The sample density will be displayed directly
Model |
ZMD-1 |
ZMD-2 |
MDY-2 |
||
|
Density/specific gravity |
Weighing |
Density/specific gravity |
Weighing |
Density/specific gravity |
Measuring range |
0~300.00g/cm⊃3; |
0~300.00g |
0 ~110.00 g/cm⊃3; |
0~110.00g |
0 ~ 50.00g/cm⊃3; |
Resolution |
0.001g/cm⊃3; |
0. 001g |
0.0001g/cm⊃3; |
0. 0001g |
0.0001g/cm⊃3; |
Calibrating poise |
200g |
100g |
50g |
||
Measuring Disc diameter |
φ90mm |
None |
|||
Measuring method |
Solid specific weight is automatically calculated. liquid density is directly read
|
||||
External dimensions |
320mmx190mmx330mm (LxWxH) |
||||
Power supply |
220V / 0.5A 50Hz or 110V(Send according to your country’s Voltage) |