A power cable is an assembly of one or more electrical conductors, usually held together with an overall sheath. The assembly is used for transmission of electrical power. Power cables may be installed as permanent wiring within buildings, buried in the ground, run overhead, or exposed.
It is used to transmit and distribute power in power transmission and distribution system of 0.6/1kV to 8.7/15kV. It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication.
1)Operating temperature
Max. Permissible continuous operating temperature of Conductors shall not exceed 90℃
2)Conductor Short circuit temperature
Not exceeding 250 . (Max. Duration 5 seconds)
3)Bending radius:
Bending radius of single core cable:20D Bending radius of multi-core cable: 15D
D=Actual overall diameter of cable (mm)
4)Installation temperature:
The lowest temperature of installation is 0℃ .
Laying conditions and basic parameters for calculating current ratings:
Method of laying: Ambient temperature
In air: 40℃ Direct burial: 25℃ Soil thermal resistivity 1.0℃· m/W
Layout of single core cables: In parallel (Spacing side by side: 1D D=overall diameter)
1. Conductor 2. Conductor Screen 3. XLPE Insulation 4. Insulation screen
5. Metallic Screen 6. Filler 7. Separator(Inner Cover) 9. Outer Sheath
Name: XLPE Insulated Power Cables
Brand: HNBF Cable
Original: China
Manufacturing Standards:
ASTM, ICEA, BS, DIN, IEC, GB AS/NZS etc.
Extruded XLPE insulation with rated voltage from 0.6/1kV to 8.7/15kV
Name: XLPE Insulated Power Cables
Brand: HNBF Cable
Original: China
Manufacturing Standards:
ASTM, ICEA, BS, DIN, IEC, GB AS/NZS etc.
Our Workshop
Our Warehouse
Our Team