0 10v sewage water pressure level sensor for 20m deep well
1>>. ELT-L10 submersible type level transmitter (also called static pressure type level transmitter) uses imported anti-corrosion diaphragm sensitive components and fit the chip into a stainless steel (or PTFE) housing. The top steel cap acts as a protective sensor diaphragm and also allows water to contact the diaphragm smoothly.
2>>. The product adopts special waterproof ventilation cable, which makes the pressure chamber of the pressure sensitive membrane communicate with the atmosphere well. Meanwhile the measurement liquid level is not affected by the change of external atmospheric pressure, the measurement is accurate with long term stability and excellent sealing and anti-corrosion performance .
3>>. It can be put directly into water, oil and other liquids (including corrosive liquids) for a long time. The outer casing and cable of PTFE material can measure a variety of highly corrosive liquids.
Liquid water level sensor |
|
Measuring Range | 0.5~500 meter |
Power supply |
12~36VDC (24VDC) |
Output Signal |
4~20mA, 0~5, 0-10V, RS485 |
Accuracy |
0.5%FS, 0.2%FS |
Response Time |
≤1ms (up to 90%FS) |
Long-term Stability |
±2F.S/Year |
Medium Temperature |
-20~80℃ |
Working Temperature |
-40~80℃ |
Overload Capacity |
200%F.S |
Insulation Resistance |
100MΩ/250VDC |
Sensitivity Drift |
±2%F.S |
Zero Drift |
±2%F.S |
Protection |
IP65 |
Measuring Medium |
Various medium which is compatible with SS304 |
Material |
Probe: 304 stainless steel Cable: polyethylene cable |
Application |
Static liquids, water tanks, wells, lake |
Water level transmitter capacitive liquid level transmitter water tank level sensor
,,